AeroScout Tail Dragger Conversion Kit - AKA the MonsterScout / TimberScout Mod - Landing Gear Conversion Mod

Transform Your AeroScout into a Bush Plane!

Can the AeroScout be a bush plane? With the KIN Additive landing gear conversion kit, YES! Utilizing the provided step by step guide and some minimally invasive surgery (provided by you) you can turn the AeroScout into a MonsterScout (TimberScout) in ~20 minutes!

*the pictured wheels are an optional add-on*

Suggest Wheel Sets and Use Case:

-Stock 3" Wheels

Asphalt runways and smooth dirt surfaces only.

Lightweight at only 20 grams per set.

-Next-Gen Airless Wheels 4.25"

Asphalt, dirt, rocky, grassy, sandy, conquer it all!

Experience superior shock absorption with the innovative crushable tire design.

Weighing 56 grams per set.

-Timber Foam Wheels 4.25"

All terrain capable with a traditional look

Weighing 60 grams per set.

(Note: wheel axle holes must be drilled out to accept 4mm axles in this particular case)

Do you have the "original fuselage" or the "new fuselage"??

- Original Fuselage:

No hole at the rudder/tail's bottom indicates the original fuselage. These models lack a control shaft access point for the rudder, making tailwheel installation impractical. For original fuselages, we recommend using a skid plate (not included) to protect the tail during rough landings.

- New Fuselage:

A hole at the rudder/tail's bottom signifies the new fuselage, allowing for easy tailwheel installation following our AeroScout conversion guide.

Each KIN Additive AeroScout Tail Dragger Kit includes all the necessary components for your landing gear conversion:

Tools Needed for Your AeroScout Upgrade:

- Needle Nose Pliers

- Hex Drivers: 2.0, 1.5, 1.3

- Small Phillips Driver

- Drills: 3/8", 1/4", 1/8"

- Razor Blade

- CA Glue